hardness machined steel drill rod

hardness machined steel drill rod

The Difference Between Round Bar, Drill Rod and Shafting ...

This process involves heating the steel to relieve the hardness and to make the steel more workable. The steel is then air cooled before machining begins. Common applications of drill rods include drill bits, taps, dowel pins, shafts, and reamers.

Drill Rod - Tool Steel - Grainger Industrial Supply

A drill rod is a form of bar stock machined to produce tools such as drill bits, taps, dowel pins, shafts, reamers, files, punches and hammers. It's soft enough to shape but can be heated up to revert back to the hardness.Oil Hard, Drill Rod Drill Rod · Air Hard, Drill Rod Drill Rod · Water Hard, Drill Rod Drill Rod

Drill Rod Tool Steel Products: A2 - O1 - W1 - D2 - S7 - M2 ...

W1 water-hardening drill rod has a lower alloy content than the other types of drill rod such as air-hardening and oil-hardening grades. The lower alloy content of this W1 grade allows the steel to be easily machined but lacks the toughness for welding.

Drill Rod | Die Supplies

Drill rod is generally purchased in an annealed condition so that the tool steel can be readily machined. After machining the pieces can be heated for greater hardness and better durability. When tool steel rods are purchased in a hardened, heat-treated condition, they may be referred to as drill blanks.

Online Metal Store | Small Quantity Metal Orders | Metal ...

The term Tool Steel is a generic description of steel which has been developed specifically for tooling applications. Generally speaking, Tool Steels are known for their distinctive toughness, resistance to abrasion, their ability to hold a cutting edge, and/or their resistance to deformation at elevated temperatures (red-hardness).

Drill Rod - Starrett

Starrett Drill Rod is produced in standard tolerances 36” length out of the following O1, A2 and W1 tool steel. Straightness is .005 max T.I.R. in 12”.

drill rod vs. tool steel - practicalmachinist

practicalmachinist› …› Manufacturing Today› GeneralOct 24, 2015· Drill rod just means that it is round, "fairly" straight, and ground smooth to a given size such as factional inch, metric, letter gage, or number gage size diameters.

What is Drill Rod used for? - practicalmachinist

practicalmachinist› …› General - ArchiveMar 18, 2005· Drill rod is a tool steel in an unhardened state. It is tough but soft enough to machine. After machining, it can be heat treated up to around 60-62Rc and drawn back to whatever hardness is required for your job.

What is Drill Rod used for? - practicalmachinist

practicalmachinist› …› General - ArchiveMar 18, 2005· Drill rod is a tool steel in an unhardened state. It is tough but soft enough to machine. After machining, it can be heat treated up to around 60-62Rc and drawn back to whatever hardness is required for your job.

Drill Rod Material Information - Windsor Steel

Drill Rod Material Information Drill Rod is manufactured to exacting standards for tolerance, size, straightness, surface finish, and uniformity. Each grade comes in 36” lengths that have been centerless ground free of decarburization and then polished to final size.

Manufacturing Processes | TuffRod HDD Drill Rod

The upsetting process forms the steel to create the desired outside diameter, inside diameter and tong length required for the pin and box connection. The next step is to heat-treat the entire tube to a specified grade or hardness. After the tube has been heat treated and straightened, the upset ends are precision machined and threaded ...

High Speed Steel | Tool Steel | O1 | O1 Technical Data

O1 Tool Steel. O1 Tool Steel is the original oil-hardening, “non-shrinking” tool steel that can be hardened to the Rockwell C 65 range from a low austenitizing temperature. O1 is a general-purpose tool steel that is typically used in applications where alloy steels cannot provide sufficient hardness, strength, and wear resistance.

A2 Technical Data - High Speed Steel | Tool Steel for Sale

A2 Tool Steel. A2 Tool Steel is a versatile, air-hardening tool steel that is characterized by good toughness and excellent dimensional stability in heat treatment.A2 is intermediate in wear resistance between O1 oil-hardening tool steel and D2 high-carbon, high-chromium tool steel.

What is drill rod used for? | Die Supplies

The tool steel drill rod pieces (O-1, A-2, D-2, H-13, S-7, M-2, and W-1) are usually machined in the annealed state and then heat treated to make hardened, long lasting tools. The Applications Table below shows the classes, steel grades, hardening methods, and typical applications for Drill Rod.

Amazon: W1 Tool Steel Round Rod, Solid, Polished ...

amazon› …› Metals & Alloys› Steel› Steel RodsThe W1 tool steel round rod has been precision ground and polished, meets American Society for Testing and Materials International ASTM A681 and Society of Automotive Engineers SAE J437 specifications, and has a precision tolerance.Reviews: 9[PDF]

TOOL STEEL - Alro Steel

A6 is an air-hardening, non-deforming tool steel that combines the deep hardening characteristics of air-hardening steels with the simplicity of low temperature heat treatment possible in many of the oil-hardening grades.

DTS - Diehl Tool Steel - Specialty Metal Distributors

Diehl Tool Steel Inc. is an international supplier of Hitachi specialty metals, tool steel, alloy steel, CPM metal, mold steel, carbon steel, and stainless steel products. We offer standard and custom cut and machined sizes for tool steel flats, bars, squares, sheets, plates, drill rod, hollow bar, and rounds.

4140 High Tensile Steel | Interlloy | Engineering Steels ...

4140 is a 1% chromium - molybdenum medium hardenability general purpose high tensile steel - generally supplied hardened and tempered in the tensile range of 850 - 1000 Mpa (condition T).4140 is now available with improved machinability, which greatly increases feeds and/or speeds, while also extending tool life without adversley affecting mechanical properties.

Mold Quality/Hot Work - Cincinnati Tool Steel

H13 combines good red hardness and abrasion resistance with the ability to resist heat checking. It is an AISI H13 hot work tool steel, the most widely used steel for aluminum and zinc die casting dies.[PDF]

AISI A2 Cold work tool steel - ccsi-inc

Cold work tool steel. AISI A2 2 FORMING Hardness HRC Tools for: ... ing the hot-rolled, pre-machined and fine-machined condition. It is also available in the form of hollow ... High speed steel twist drill Drill diameter Cutting speed (vc) Feed (f) inch mm f.p.m. m/min i.p.r. mm/r

Drill rod, Music wire - The WoodenBoat Forum

Jan 28, 2008· Drill ROD is avaible not hardened in most grades of tool steel, 1020 is not a tool steel. Drill BLANKS are are cut to length, hardened, and ground, availble in most tool steels as well as most grades of carbide, prime use is to make cutting tools.

Rock Drill Steels - Shanghai Unite Steel - gaslinepipe

The maximum permissable decarburization depth of this rock drill steels is 0.30 mm (0.012 in.) on the outer surface and 0.20 mm (0.008 in.) on the inner surface. Machinability: Sanbar 64 can be machined in the hot rolled condition.

Get In Touch24/7 Support

ADD : XICHENG SCIENCE & TECHNOLOGY BUILDING HIGH-TECH DEVELOPMENT ZONE, ZHENGZHOU, CHINA

TEL : 0086-371-86151827

FAX : 0086-371-86011881