high speed m42 tool steel

high speed m42 tool steel

High Speed Steel | M42 Tool Steel | M42 Steel

M42 super high speed steel is a premium cobalt high speed steel with a chemical composition designed for high hardness and superior hot hardness. These properties make the steel an excellent choice for machining high-strength and pre-hardened steels, high-hardness alloys, and the difficult-to-machine, nonferrous super alloys used in the ...

M42 High Speed Steel - Alloy Steel | Griggs Steel

M42 is a molybdenum series high-speed steel alloy with an additional 8 or 10 percent cobalt. It is widely used in metal manufacturing industries because of its superior red hardness as compared to more conventional high-speed steels.

High-speed steel - Wikipedia

High-speed steel (HSS or HS) is a subset of tool steels, commonly used as cutting tool material. It is often used in power-saw blades and drill bits . It is superior to the older high- carbon steel tools used extensively through the 1940s in that it can withstand higher temperatures without losing …History·

High Speed Tool Steel Products: M2 - M4 - M42 - T1 - T15

M42 High-Speed Tool Steel M42 is a cobalt-molybdenum super high speed steel that is known for its superior red-hardness in comparison to M2 steel. The addition of cobalt to the composition of M42 provides a good balance of toughness and hardness.

High Speed Steel - Saaj Steels Corporation | High Speed ...

High Speed Steel M42. The chemical composition of M42 molybdenum high speed tool steel is outlined in the following table.M42 tool steel can be drilled, turned, threaded, broached, milled and tapped when it is in its annealed condition and rated at 45% of 1% carbon steel.M42 molybdenum high speed tool steel is preheated to 871°C (1599°F) in a slow manner and then soaked.

M42 Tool Steel | M42 High Speed Steel | Die Steel Grade M42

Virat Special Steels is the leading Supplier & Stockiest of M42 Steel in India. M42 is a excessive-carbon, excessive-pace steel founded on molybdenum. Characterized by excessive put on resistance, red hardness and durability.

High Speed Steel | Tool Steel | Compare Tool Steel

High-speed steels exhibit high strength and hardness, but typically exhibit lower toughness than the cold work tool steels. Some, most notably M2 and powder metal M4, are used in cold work applications because of the strength and wear resistance which can be achieved.

M42 High Speed Steel - West Yorkshire Steel - Established ...

M42 high speed steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of M42 in round bar. This grade is a cobalt molybdenum high speed steel which achieves a high hardness and superior hot hardness.

Otai Special Steel - High Speed Steel, Tool Steel ...

Otai Special Steel is a reliable supplier and sincere business partner of high speed steel, hot works and cold works steel, plastic mold steel and engineering steel.

AISI M42 Tool Steel - High Speed Steel | Steel Bar

M42 High Speed Steel. AISI M42 Tool Steel is an important Cobalt-Molybdenum high speed tool steel with an additional 8% cobalt. This HSS grade has a high hardness and superior hot hardness. AISI M42 Steel is suitable for heat treatment up to 70 HRC, and offers excellent cutting performance.

High Speed Steel - Otai Special Steel

AISI high speed steel material M42 tool steel is a molybdenum-series high-speed steel alloy with an additional 8% cobalt. High-speed steel M42 steel is widely used in metal manufacturing industries and in cutting tools manufacturing.

Providing High Speed Steel For Over 65 Years - Griggs ...

High Speed Steel. Griggs has been providing High Speed Tool Steel to the cutting tool and forming tool industries for over 65 years. Our customers range from the largest punch, reamer drill, broach, form tool and tap manufacturers in the world to thousands of smaller shops.

M42 high speed steel - Special steel china supplier-OTAI ...

M42 High speed steel china supplier and and stockholders. Otai Special steel is supplier in round bar, plate, flat, square M42 tool steel material. The M42 High Speed Steel is known for its balanced combination of abrasion resistance, toughness and good red hardness.M42 is a tungsten-molybdenum high speed steel. it is used in a variety of ...

AISI M42 Steel | AISI M42 High Speed Tool Steel | Steel ...

AISI M42 is an excessive-carbon, excessive-pace steel founded on molybdenum. Characterized by excessive put on resistance, red hardness and durability. For this reason of its low vanadium content, this grade reveals excellent grind ability.

High Speed Steel Tool Bits - West Yorkshire Steel

M42 high speed steel is a cobalt molybdenum grade with a high hardness and superior hot hardness offering excellent cutting performance and excellent wear resistance. As an 8% cobalt high speed steel type M42 tool bits are suited for tougher materials such as work hardening types. They offer increased tool life with retention of the cutting edge.

High Speed Steel - High Speed Steel(HSS)-M2, M35, M42, …

Leading Wholesaler of high speed steel(hss)-m2, m35, m42, t1(alloy tool die steel), m35 high speed steel m35 hss m35 round m35 bars, t1 high speed steel t1 hss rods t1 round bar t-1 bars, m2 high speed steel m-2 hss rods m2 round m2 bars and m42 high speed steel m42 hss m42 round m42 …

High Speed Steel | Steel Bar

M35 High Speed Steel AISI M35 Tool Steel is a Cobalt-Type high speed tool steel. M35 steel is on the basis of M2 Steel, but with 5% Cobalt content increased …

M42 Molybdenum High Speed Tool Steel - AZoM

M42 molybdenum high speed tool steel is preheated to 871°C (1599°F) in a slow manner and then soaked. This is followed by rapid heating to 1093°C (1999°F) and slow cooling. Temperatures below 982°C (1799°F) are not suitable for the forging process.

M42 High Speed Steel - BandSawBlogBandSawBlog

High Speed Steel, categorized as tool steel, is commonly used to cut tool bits, power saw blades, and bandsaw blades. Tougher than its predecessor, carbon steel, HSS is more tolerant of higher temperatures without compromising on hardness.

HSS M42 Steel 1.3247| H-S 2-10-1-8 | SKH59| 2716 HSS high ...

SAE M42-steel is a high Molybdenum – high Cobalt high speed tool steel. It is used to high strength, high hardness, high temperature tools products material. It is used to high strength, high hardness, high temperature tools products material.

Tool Steel-High Speed Steel China Supplier - saesteel

Tungsten high speed steel is the most used high speed steel, The Tungsten composition higher than 11%. it has good comprehensive performance, have high hardness (HRC 62 ~ 66), strength, toughness and heat resistance, red hardness can reach 620 degrees Celsius.

M-42 - Diehl Tool Steel - Specialty Metal Distributors

M-42 High Speed Tool Steel M-42 is a molybdenum-chromium-vanadium-tungsten high speed steel alloy with an additional 8% cobalt. It is widely used in metal manufacturing because of its superior red-hardness as compared to more conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool …

Get In Touch24/7 Support

ADD : XICHENG SCIENCE & TECHNOLOGY BUILDING HIGH-TECH DEVELOPMENT ZONE, ZHENGZHOU, CHINA

TEL : 0086-371-86151827

FAX : 0086-371-86011881